SANbox SNMP MIB's (07/21/2003)


Overview
______________
The SANbox family of Fibre Channel switch products provides support of SNMP which
allows you to monitor and manage a Switch using Simple Network Management Protocol(SNMP) 
for the supported MIBs.



Components
______________
 qlogic_snmp_mib_YYYYMM.zip	This is the zip file downloaded


The components are as follows:
Files						Description
_____________________			_____________________________
 /fa/fa_30.mib				 Fibre Alliance 3.0 MIB (firmware version 3.05.50 and 1.0.x-1.3.x)
 /fa/fa_40.mib				 Fibre Alliance 4.0 MIB (firmware version 1.4.x and higher)
 /fe/fe.mib				 Fabric Element MIB (rfc2837)
 /fe/snmp-framework.mib			 SNMP Management Architecture MIB (rfc2571)
 /manuals/snmp_manual_1.3		 SNMP Manual version 1.3 (59044-00 rev.a)
 /manuals/snmp_manual_1.4		 SNMP Manual version 1.4 (59047-00 rev.a)
 /manuals/snmp_manual_2.0		 SNMP Manual version 2.0 (59047-01 rev.a)
 /readme_qlogic_snmp_mib_YYYYMM.txt	 This readme file


Support Matrix
______________
Firmware version	Switch		FA Version	Manual
 3.05.50		 SB		 fa_30.mib	 -
 1.0.x - 1.3.x	 	 SB2		 fa_30.mib	 snmp_manual_1.3
 1.4.x - 1.5.x		 SB2		 fa_40.mib	 snmp_manual_1.4
 2.x and higher		 SB2		 fa_40.mib	 snmp_manual_2.0


Installation
______________
Download and extract the MIB files to a temporary directory.  Refer to the SNMP
application for loading of the MIB files.



Manuals
______________
The SANbox Switch Installer's/User's Manual and the Switch Management
Installer's/User's Manual manuals are available on QLogic's support
web.  http://support.qlogic.com



Comments
______________
For more information about SNMP, checkout the following websites:

	http://www.fibrealliance.org
	http://www.ietf.org 
	http://www.snmp.com

If you have questions or comments, please contact QLogic Technical Support:
	Phone:	(952) 932-4040
	Email:	support@qlogic.com
	Web:	http://support.qlogic.com